Always blot a carpet rather than rub to prevent damage.. To get rid of any remaining solution and dirt, give the area a rinse with cold water and blot it dry again with a different cloth.
This reduces performance and makes your Vax less effective on carpets.. For this reason, it’s important to regularly remove caught fibres using the method outlined above.Here’s a quick recap:.
Always make sure the vacuum is switched off before performing any maintenance..Remove the floorhead from the vacuum.. Use a coin to unlock the brush bar and slide it out of the floorhead.. Run scissors along the groove in the brush bar and cut away tangled hair.. Use a dry cloth to wipe the inside of the floorhead.Check for any blockages at the outlet.. Slide the brush bar back into position and return the end cap to a locked position.. We hope this article has helped you to remove hair from your Vax Blade’s brush bar.
If you have any questions, please let us know in the comments section below.You may also want to read our guide to.
cleaning the Vax Blade 4’s filterWhere are Vax vacuum cleaners made?
And are any of this British company’s products still manufactured in the UK?Remove any larger objects that might stop the brush from turning.
Check for any blockages at the inlet.Clean away any grime or sticky substances from the brush.
Once you’ve cleared any potential blockages, replace the brush roll and try to rotate it manually.You should be able to turn the brush while feeling some resistance.
(Editor: Lightweight Mirrors)