Yes, it’s possible to replace a Dyson V8 battery.
Step 2: Remove the Base Plate.Make sure your vacuum is switched off and unplugged before attempting to replace the belt!.
As the vacuum belt turns the brush bar, you’ll need to access this area.Start by tilting the vacuum onto its back, then removing the base plate.. You’ll probably need a screwdriver to remove the plate and get full access to the brushroll area..Step 3: Remove the Brush Bar (if Necessary) and Broken Belt.
Once the base plate is removed, you should be able to access both the brushroll and the belt..But before you start the replacement process, look carefully at how the belt attaches to the brush roll.
Is it held in place by tension alone?
Or is there something else that’s holding the belt in position?The good news is that cleaning the canister is a straightforward process.
Here’s a step-by-step guide to cleaning your Shark’s dust cup and eliminating bad smells..This guide is based on the Shark Rocket series, although the process is similar for all Shark cordless vacuums.
Check your manual for specific instructions.You might also be interested in our guide to.
(Editor: Smart Stands)